What is Grayscale?Grayscale is the company that created the ETHE product. Their website is https://grayscale.co/
What is ETHE?ETHE is essentially a stock that intends to loosely track the price of ETH. It does so by having each ETHE be backed by a specific amount of ETH that is held on chain. Initially, the newly minted ETHE can only be purchased by institutions and accredited investors directly from Grayscale. Once a year has passed (6 months for GBTC) it can then be listed on the OTCQX Best Market exchange for secondary trading. Once listed on OTCQX, anyone investor can purchase at this point. Additional information on ETHE can be found here.
So ETHE is an ETF?No. For technical reasons beyond my personal understandings it is not labeled an ETF. I know it all flows back to the “Securities Act Rule 144”, but due to my limited knowledge on SEC regulations I don’t want to misspeak past that. If anyone is more knowledgeable on the subject I am happy to input their answer here.
How long has ETHE existed?ETHE was formed 12/14/2017. GBTC was formed 9/25/2013.
How is ETHE created?The trust will issue shares to “Authorized Participants” in groups of 100 shares (called baskets). Authorized Participants are the only persons that may place orders to create these baskets and they do it on behalf of the investor.
How does Grayscale acquire the ETH to collateralize the ETHE product?An Investor may acquire ETHE by paying in cash or exchanging ETH already owned.
Where does Grayscale store their ETH? Does it have a specific wallet address we can follow?ETH is stored with Coinbase Custody Trust Company, LLC. I am unaware of any specific address or set of addresses that can be used to verify the ETH is actually there.
Can ETHE be redeemed for ETH?No, currently there is no way to give your shares of ETHE back to Grayscale to receive ETH back. The only method of getting back into ETH would be to sell your ETHE to someone else and then use those proceeds to buy ETH yourself.
Why are they not redeeming shares?I think the report summarizes it best:
Redemptions of Shares are currently not permitted and the Trust is unable to redeem Shares. Subject to receipt of regulatory approval from the SEC and approval by the Sponsor in its sole discretion, the Trust may in the future operate a redemption program. Because the Trust does not believe that the SEC would, at this time, entertain an application for the waiver of rules needed in order to operate an ongoing redemption program, the Trust currently has no intention of seeking regulatory approval from the SEC to operate an ongoing redemption program.Source: Redemption Procedures on page 41 of the “Grayscale Ethereum Trust Annual Report (2019)” – Located Here
What is the fee structure?ETHE has an annual fee of 2.5%. GBTC has an annual fee of 2.0%. Fees are paid by selling the underlying ETH / BTC collateralizing the asset.
What is the ratio of ETH to ETHE?At the time of posting (6/19/2020) each ETHE share is backed by .09391605 ETH. Each share of GBTC is backed by .00096038 BTC.
Why is the ratio not 1:1? Why is it always decreasing?While I cannot say for certain why the initial distribution was not a 1:1 backing, it is more than likely to keep the price down and allow more investors a chance to purchase ETHE / GBTC.
I keep hearing about how this is locked supply… explain?As noted above, there is currently no redemption program for converting your ETHE back into ETH. This means that once an ETHE is issued, it will remain in circulation until a redemption program is formed --- something that doesn’t seem to be too urgent for the SEC or Grayscale at the moment. Tiny amounts will naturally be removed due to fees, but the bulk of the asset is in there for good.
The Trust’s ETH will be transferred out of the ETH Account only in the following circumstances: (i) transferred to pay the Sponsor’s Fee or any Additional Trust Expenses, (ii) distributed in connection with the redemption of Baskets (subject to the Trust’s obtaining regulatory approval from the SEC to operate an ongoing redemption program and the consent of the Sponsor), (iii) sold on an as-needed basis to pay Additional Trust Expenses or (iv) sold on behalf of the Trust in the event the Trust terminates and liquidates its assets or as otherwise required by law or regulation.Source: Description of Trust on page 31 of the “Grayscale Ethereum Trust Annual Report (2019)” – Located Here
Grayscale now owns a huge chunk of both ETH and BTC’s supply… should we be worried about manipulation, a sell off to crash the market crash, a staking cartel?First, it’s important to remember Grayscale is a lot more akin to an exchange then say an investment firm. Grayscale is working on behalf of its investors to create this product for investor control. Grayscale doesn’t ‘control’ the ETH it holds any more then Coinbase ‘controls’ the ETH in its hot wallet. (Note: There are likely some varying levels of control, but specific to this topic Grayscale cannot simply sell [legally, at least] the ETH by their own decision in the same manner Coinbase wouldn't be able to either.)
Yes, but what about [insert criminal act here]…Alright, yes. Technically nothing is stopping Grayscale from selling all the ETH / BTC and running off to the Bahamas (Hawaii?). BUT there is no real reason for them to do so. Barry is an extremely public figure and it won’t be easy for him to get away with that. Grayscale’s Bitcoin Trust creates SEC reports weekly / bi-weekly and I’m sure given the sentiment towards crypto is being watched carefully. Plus, Grayscale is making tons of consistent revenue and thus has little to no incentive to give that up for a quick buck.
That’s a lot of ‘happy little feels’ Bob, is there even an independent audit or is this Tether 2.0?Actually yes, an independent auditor report can be found in their annual reports. It is clearly aimed more towards the financial side and I doubt the auditors are crypto savants, but it is at least one extra set of eyes. Auditors are Friedman LLP – Auditor since 2015.
The company’s auditors Friedman LLP were also coincidentally TetheBitfinex’s auditors until They controversially parted ways in 2018 when the Tether controversy was at its height. I am not suggesting for one moment that there is anything shady about DCG - I just find it interesting it’s the same auditor.
“Grayscale sounds kind of lame” / “Not your keys not your crypto!” / “Why is anyone buying this, it sounds like a scam?”Welp, for starters this honestly is not really a product aimed at the people likely to be reading this post. To each their own, but do remember just because something provides no value to you doesn’t mean it can’t provide value to someone else. That said some of the advertised benefits are as follows:
Why is there a premium? Why is ETHE’s premium so insanely high compared to GBTC’s premium?There are a handful of theories of why a premium exists at all, some even mentioned in the annual report. The short list is as follows:
Are there any other differences between ETHE and GBTC?I touched on a few of the smaller differences, but one of the more interesting changes is GBTC is now a “SEC reporting company” as of January 2020. Which again goes beyond my scope of knowledge so I won’t comment on it too much… but the net result is GBTC is now putting out weekly / bi-weekly 8-K’s and annual 10-K’s. This means you can track GBTC that much easier at the moment as well as there is an extra layer of validity to the product IMO.
I’m looking for some statistics on ETHE… such as who is buying, how much is bought, etc?There is a great Q1 2020 report I recommend you give a read that has a lot of cool graphs and data on the product. It’s a little GBTC centric, but there is some ETHE data as well. It can be found here hidden within the 8-K filings.Q1 2020 is the 4/16/2020 8-K filing.
Is Grayscale only just for BTC and ETH?No, there are other products as well. In terms of a secondary market product, ETCG is the Ethereum Classic version of ETHE. Fun Fact – ETCG was actually put out to the secondary market first. It also has a 3% fee tied to it where 1% of it goes to some type of ETC development fund.
Are there alternatives to Grayscale?I know they exist, but I don’t follow them. I’ll leave this as a “to be edited” section and will add as others comment on what they know.
Coinshares (Formerly XBT provider) are the only similar product I know of. BTC, ETH, XRP and LTC as Exchange Traded Notes (ETN).
It looks like they are fully backed with the underlying crypto (no premium).
Denominated in SEK and EUR. Certainly available in some UK pensions (SIPP).
As asked by pegcity - Okay so I was under the impression you can just give them your own ETH and get ETHE, but do you get 11 ETHE per ETH or do you get the market value of ETH in USD worth of ETHE?I have always understood that the ETHE issued directly through Grayscale is issued without the premium. As in, if I were to trade 1 ETH for ETHE I would get 11, not say only 2 or 3 because the secondary market premium is so high. And if I were paying cash only I would be paying the price to buy 1 ETH to get my 11 ETHE. Per page 39 of their annual statement, it reads as follows:
The Trust will issue Shares to Authorized Participants from time to time, but only in one or more Baskets (with a Basket being a block of 100 Shares). The Trust will not issue fractions of a Basket. The creation (and, should the Trust commence a redemption program, redemption) of Baskets will be made only in exchange for the delivery to the Trust, or the distribution by the Trust, of the number of whole and fractional ETH represented by each Basket being created (or, should the Trust commence a redemption program, redeemed), which is determined by dividing (x) the number of ETH owned by the Trust at 4:00 p.m., New York time, on the trade date of a creation or redemption order, after deducting the number of ETH representing the U.S. dollar value of accrued but unpaid fees and expenses of the Trust (converted using the ETH Index Price at such time, and carried to the eighth decimal place), by (y) the number of Shares outstanding at such time (with the quotient so obtained calculated to one one-hundred-millionth of one ETH (i.e., carried to the eighth decimal place)), and multiplying such quotient by 100 (the “Basket ETH Amount”). All questions as to the calculation of the Basket ETH Amount will be conclusively determined by the Sponsor and will be final and binding on all persons interested in the Trust. The Basket ETH Amount multiplied by the number of Baskets being created or redeemed is the “Total Basket ETH Amount.” The number of ETH represented by a Share will gradually decrease over time as the Trust’s ETH are used to pay the Trust’s expenses. Each Share represented approximately 0.0950 ETH and 0.0974 ETH as of December 31, 2019 and 2018, respectively.
Author: Gamals Ahmed, CoinEx Business Ambassadorsubmitted by CoinEx_Institution to kybernetwork [link] [comments]
ABSTRACTIn this research report, we present a study on Kyber Network. Kyber Network is a decentralized, on-chain liquidity protocol designed to make trading tokens simple, efficient, robust and secure.
Kyber design allows any party to contribute to an aggregated pool of liquidity within each blockchain while providing a single endpoint for takers to execute trades using the best rates available. We envision a connected liquidity network that facilitates seamless, decentralized cross-chain token swaps across Kyber based networks on different chains.
Kyber is a fully on-chain liquidity protocol that enables decentralized exchange of cryptocurrencies in any application. Liquidity providers (Reserves) are integrated into one single endpoint for takers and users. When a user requests a trade, the protocol will scan the entire network to find the reserve with the best price and take liquidity from that particular reserve.
1.INTRODUCTIONDeFi applications all need access to good liquidity sources, which is a critical component to provide good services. Currently, decentralized liquidity is comprised of various sources including DEXes (Uniswap, OasisDEX, Bancor), decentralized funds and other financial apps. The more scattered the sources, the harder it becomes for anyone to either find the best rate for their trade or to even find enough liquidity for their need.
Kyber is a blockchain-based liquidity protocol that aggregates liquidity from a wide range of reserves, powering instant and secure token exchange in any decentralized application.
The protocol allows for a wide range of implementation possibilities for liquidity providers, allowing a wide range of entities to contribute liquidity, including end users, decentralized exchanges and other decentralized protocols. On the taker side, end users, cryptocurrency wallets, and smart contracts are able to perform instant and trustless token trades at the best rates available amongst the sources.
The Kyber Network is project based on the Ethereum protocol that seeks to completely decentralize the exchange of crypto currencies and make exchange trustless by keeping everything on the blockchain.
Through the Kyber Network, users should be able to instantly convert or exchange any crypto currency.
1.1 OVERVIEW ABOUT KYBER NETWORK PROTOCOLThe Kyber Network is a decentralized way to exchange ETH and different ERC20 tokens instantly — no waiting and no registration needed.
Using this protocol, developers can build innovative payment flows and applications, including instant token swap services, ERC20 payments, and financial DApps — helping to build a world where any token is usable anywhere.
Kyber’s fully on-chain design allows for full transparency and verifiability in the matching engine, as well as seamless composability with DApps, not all of which are possible with off-chain or hybrid approaches. The integration of a large variety of liquidity providers also makes Kyber uniquely capable of supporting sophisticated schemes and catering to the needs of DeFi DApps and financial institutions. Hence, many developers leverage Kyber’s liquidity pool to build innovative financial applications, and not surprisingly, Kyber is the most used DeFi protocol in the world.
The Kyber Network is quite an established project that is trying to change the way we think of decentralised crypto currency exchange.
The Kyber Network has seen very rapid development. After being announced in May 2017 the testnet for the Kyber Network went live in August 2017. An ICO followed in September 2017, with the company raising 200,000 ETH valued at $60 million in just one day.
The live main net was released in February 2018 to whitelisted participants, and on March 19, 2018, the Kyber Network opened the main net as a public beta. Since then the network has seen increasing growth, with network volumes growing more than 500% in the first half of 2019.
Although there was a modest decrease in August 2019 that can be attributed to the price of ETH dropping by 50%, impacting the overall total volumes being traded and processed globally.
They are developing a decentralised exchange protocol that will allow developers to build payment flows and financial apps. This is indeed quite a competitive market as a number of other such protocols have been launched.
In Brief - Kyber Network is a tool that allows anyone to swap tokens instantly without having to use exchanges. - It allows vendors to accept different types of cryptocurrency while still being paid in their preferred crypto of choice. - It’s built primarily for Ethereum, but any smart-contract based blockchain can incorporate it.
At its core, Kyber is a decentralized way to exchange ETH and different ERC20 tokens instantly–no waiting and no registration needed. To do this Kyber uses a diverse set of liquidity pools, or pools of different crypto assets called “reserves” that any project can tap into or integrate with.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
All this swapping happens directly on the Ethereum blockchain, meaning every transaction is completely transparent.
1.1.1 WHY BUILD THE KYBER NETWORK?While crypto currencies were built to be decentralized, many of the exchanges for trading crypto currencies have become centralized affairs. This has led to security vulnerabilities, with many exchanges becoming the victims of hacking and theft.
It has also led to increased fees and costs, and the centralized exchanges often come with slow transfer times as well. In some cases, wallets have been locked and users are unable to withdraw their coins.
Decentralized exchanges have popped up recently to address the flaws in the centralized exchanges, but they have their own flaws, most notably a lack of liquidity, and often times high costs to modify trades in their on-chain order books.
Some of the Integrations with Kyber Protocol
The Kyber Network was formed to provide users with a decentralized exchange that keeps everything right on the blockchain, and uses a reserve system rather than an order book to provide high liquidity at all times. This will allow for the exchange and transfer of any cryptocurrency, even cross exchanges, and costs will be kept at a minimum as well.
The Kyber Network has three guiding design philosophies since the start:
1.1.2 WHO INVENTED KYBER?Kyber’s founders are Loi Luu, Victor Tran, Yaron Velner — CEO, CTO, and advisor to the Kyber Network.
1.1.3 WHAT DISTINGUISHES KYBER?Kyber’s mission has always been to integrate with other protocols so they’ve focused on being developer-friendly by providing architecture to allow anyone to incorporate the technology onto any smart-contract powered blockchain. As a result, a variety of different dapps, vendors, and wallets use Kyber’s infrastructure including Set Protocol, bZx, InstaDApp, and Coinbase wallet.
Besides, dapps, vendors, and wallets, Kyber also integrates with other exchanges such as Uniswap — sharing liquidity pools between the two protocols.
A typical use case would be if a vendor allowed customers to pay in whatever currency they wish, but receive the payment in their preferred token. Another example would be for Dapp users. At present, if you are not a token holder of a certain Dapp you can’t use it. With Kyber, you could use your existing tokens, instantly swap them for the Dapp specific token and away you go.
Limit orders on Kyber allow users to set a specific price in which they would like to exchange a token instead of accepting whatever price currently exists at the time of trading. However, unlike with other exchanges, users never lose custody of their crypto assets during limit orders on Kyber.
The Kyber protocol works by using pools of crypto funds called “reserves”, which currently support over 70 different ERC20 tokens. Reserves are essentially smart contracts with a pool of funds. Different parties with different prices and levels of funding control all reserves. Instead of using order books to match buyers and sellers to return the best price, the Kyber protocol looks at all the reserves and returns the best price among the different reserves. Reserves make money on the “spread” or differences between the buying and selling prices. The Kyber wants any token holder to easily convert one token to another with a minimum of fuss.
1.2 KYBER PROTOCOLThe protocol smart contracts offer a single interface for the best available token exchange rates to be taken from an aggregated liquidity pool across diverse sources. ● Aggregated liquidity pool. The protocol aggregates various liquidity sources into one liquidity pool, making it easy for takers to find the best rates offered with one function call. ● Diverse sources of liquidity. The protocol allows different types of liquidity sources to be plugged into. Liquidity providers may employ different strategies and different implementations to contribute liquidity to the protocol. ● Permissionless. The protocol is designed to be permissionless where any developer can set up various types of reserves, and any end user can contribute liquidity. Implementations need to take into consideration various security vectors, such as reserve spamming, but can be mitigated through a staking mechanism. We can expect implementations to be permissioned initially until the maintainers are confident about these considerations.
The core feature that the Kyber protocol facilitates is the token swap between taker and liquidity sources. The protocol aims to provide the following properties for token trades: ● Instant Settlement. Takers do not have to wait for their orders to be fulfilled, since trade matching and settlement occurs in a single blockchain transaction. This enables trades to be part of a series of actions happening in a single smart contract function. ● Atomicity. When takers make a trade request, their trade either gets fully executed, or is reverted. This “all or nothing” aspect means that takers are not exposed to the risk of partial trade execution. ● Public rate verification. Anyone can verify the rates that are being offered by reserves and have their trades instantly settled just by querying from the smart contracts. ● Ease of integration. Trustless and atomic token trades can be directly and easily integrated into other smart contracts, thereby enabling multiple trades to be performed in a smart contract function.
How each actor works is specified in Section Network Actors. 1. Takers refer to anyone who can directly call the smart contract functions to trade tokens, such as end-users, DApps, and wallets. 2. Reserves refer to anyone who wishes to provide liquidity. They have to implement the smart contract functions defined in the reserve interface in order to be registered and have their token pairs listed. 3. Registered reserves refer to those that will be cycled through for matching taker requests. 4. Maintainers refer to anyone who has permission to access the functions for the adding/removing of reserves and token pairs, such as a DAO or the team behind the protocol implementation. 5. In all, they comprise of the network, which refers to all the actors involved in any given implementation of the protocol.
The protocol implementation needs to have the following: 1. Functions for takers to check rates and execute the trades 2. Functions for the maintainers to registeremove reserves and token pairs 3. Reserve interface that defines the functions reserves needs to implement
1.3 KYBER CORE SMART CONTRACTSKyber Core smart contracts is an implementation of the protocol that has major protocol functions to allow actors to join and interact with the network. For example, the Kyber Core smart contracts provide functions for the listing and delisting of reserves and trading pairs by having clear interfaces for the reserves to comply to be able to register to the network and adding support for new trading pairs. In addition, the Kyber Core smart contracts also provide a function for takers to query the best rate among all the registered reserves, and perform the trades with the corresponding rate and reserve. A trading pair consists of a quote token and any other token that the reserve wishes to support. The quote token is the token that is either traded from or to for all trades. For example, the Ethereum implementation of the Kyber protocol uses Ether as the quote token.
In order to search for the best rate, all reserves supporting the requested token pair will be iterated through. Hence, the Kyber Core smart contracts need to have this search algorithm implemented.
The key functions implemented in the Kyber Core Smart Contracts are listed in Figure 2 below. We will visit and explain the implementation details and security considerations of each function in the Specification Section.
1.4 HOW KYBER’S ON-CHAIN PROTOCOL WORKS?Kyber is the liquidity infrastructure for decentralized finance. Kyber aggregates liquidity from diverse sources into a pool, which provides the best rates for takers such as DApps, Wallets, DEXs, and End users.
1.4.1 PROVIDING LIQUIDITY AS A RESERVEAnyone can operate a Kyber Reserve to market make for profit and make their tokens available for DApps in the ecosystem. Through an open reserve architecture, individuals, token teams and professional market makers can contribute token assets to Kyber’s liquidity pool and earn from the spread in every trade. These tokens become available at the best rates across DApps that tap into the network, making them instantly more liquid and useful.
MAIN RESERVE TYPES Kyber currently has over 45 reserves in its network providing liquidity. There are 3 main types of reserves that allow different liquidity contribution options to suit the unique needs of different providers. 1. Automated Price Reserves (APR) — Allows token teams and users with large token holdings to have an automated yet customized pricing system with low maintenance costs. Synthetix and Melon are examples of teams that run APRs. 2. Fed Price Reserves (FPR) — Operated by professional market makers that require custom and advanced pricing strategies tailored to their specific needs. Kyber alongside reserves such as OneBit, runs FPRs. 3. Bridge Reserves (BR) — These are specialized reserves meant to bring liquidity from other on-chain liquidity providers like Uniswap, Oasis, DutchX, and Bancor into the network.
1.5 KYBER NETWORK ROLESThere Kyber Network functions through coordination between several different roles and functions as explained below: - Users — This entity uses the Kyber Network to send and receive tokens. A user can be an individual, a merchant, and even a smart contract account. - Reserve Entities — This role is used to add liquidity to the platform through the dynamic reserve pool. Some reserve entities are internal to the Kyber Network, but others may be registered third parties. Reserve entities may be public if the public contributes to the reserves they hold, otherwise they are considered private. By allowing third parties as reserve entities the network adds diversity, which prevents monopolization and keeps exchange rates competitive. Allowing third party reserve entities also allows for the listing of less popular coins with lower volumes. - Reserve Contributors — Where reserve entities are classified as public, the reserve contributor is the entity providing reserve funds. Their incentive for doing so is a profit share from the reserve. - The Reserve Manager — Maintains the reserve, calculates exchange rates and enters them into the network. The reserve manager profits from exchange spreads set by them on their reserves. They can also benefit from increasing volume by accessing the entire Kyber Network. - The Kyber Network Operator — Currently the Kyber Network team is filling the role of the network operator, which has a function to adds/remove Reserve Entities as well as controlling the listing of tokens. Eventually, this role will revert to a proper decentralized governance.
1.6 BASIC TOKEN TRADEA basic token trade is one that has the quote token as either the source or destination token of the trade request. The execution flow of a basic token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for ETH as an example. The trade happens in a single blockchain transaction. 1. Taker sends 1 ETH to the protocol contract, and would like to receive BAT in return. 2. Protocol contract queries the first reserve for its ETH to BAT exchange rate. 3. Reserve 1 offers an exchange rate of 1 ETH for 800 BAT. 4. Protocol contract queries the second reserve for its ETH to BAT exchange rate. 5. Reserve 2 offers an exchange rate of 1 ETH for 820 BAT. 6. This process goes on for the other reserves. After the iteration, reserve 2 is discovered to have offered the best ETH to BAT exchange rate. 7. Protocol contract sends 1 ETH to reserve 2. 8. The reserve sends 820 BAT to the taker.
1.7 TOKEN-TO-TOKEN TRADEA token-to-token trade is one where the quote token is neither the source nor the destination token of the trade request. The exchange flow of a token to token trade is depicted in the diagram below, where a taker would like to exchange BAT tokens for DAI as an example. The trade happens in a single blockchain transaction. 1. Taker sends 50 BAT to the protocol contract, and would like to receive DAI in return. 2. Protocol contract sends 50 BAT to the reserve offering the best BAT to ETH rate. 3. Protocol contract receives 1 ETH in return. 4. Protocol contract sends 1 ETH to the reserve offering the best ETH to DAI rate. 5. Protocol contract receives 30 DAI in return. 6. Protocol contract sends 30 DAI to the user.
2.KYBER NETWORK CRYSTAL (KNC) TOKENKyber Network Crystal (KNC) is an ERC-20 utility token and an integral part of Kyber Network.
KNC is the first deflationary staking token where staking rewards and token burns are generated from actual network usage and growth in DeFi.
The Kyber Network Crystal (KNC) is the backbone of the Kyber Network. It works to connect liquidity providers and those who need liquidity and serves three distinct purposes. The first of these is to collect transaction fees, and a portion of every fee collected is burned, which keeps KNC deflationary. Kyber Network Crystals (KNC), are named after the crystals in Star Wars used to power light sabers.
The KNC also ensures the smooth operation of the reserve system in the Kyber liquidity since entities must use third-party tokens to buy the KNC that pays for their operations in the network.
KNC allows token holders to play a critical role in determining the incentive system, building a wide base of stakeholders, and facilitating economic flow in the network. A small fee is charged each time a token exchange happens on the network, and KNC holders get to vote on this fee model and distribution, as well as other important decisions. Over time, as more trades are executed, additional fees will be generated for staking rewards and reserve rebates, while more KNC will be burned. - Participation rewards — KNC holders can stake KNC in the KyberDAO and vote on key parameters. Voters will earn staking rewards (in ETH) - Burning — Some of the network fees will be burned to reduce KNC supply permanently, providing long-term value accrual from decreasing supply. - Reserve incentives — KNC holders determine the portion of network fees that are used as rebates for selected liquidity providers (reserves) based on their volume performance.
Finally, the KNC token is the connection between the Kyber Network and the exchanges, wallets, and dApps that leverage the liquidity network. This is a virtuous system since entities are rewarded with referral fees for directing more users to the Kyber Network, which helps increase adoption for Kyber and for the entities using the Network.
And of course there will soon be a fourth and fifth uses for the KNC, which will be as a staking token used to generate passive income, as well as a governance token used to vote on key parameters of the network.
The Kyber Network Crystal (KNC) was released in a September 2017 ICO at a price around $1. There were 226,000,000 KNC minted for the ICO, with 61% sold to the public. The remaining 39% are controlled 50/50 by the company and the founders/advisors, with a 1 year lockup period and 2 year vesting period.
Currently, just over 180 million coins are in circulation, and the total supply has been reduced to 210.94 million after the company burned 1 millionth KNC token in May 2019 and then its second millionth KNC token just three months later.
That means that while it took 15 months to burn the first million KNC, it took just 10 weeks to burn the second million KNC. That shows how rapidly adoption has been growing recently for Kyber, with July 2019 USD trading volumes on the Kyber Network nearly reaching $60 million. This volume has continued growing, and on march 13, 2020 the network experienced its highest daily trading activity of $33.7 million in a 24-hour period.
Currently KNC is required by Reserve Managers to operate on the network, which ensures a minimum amount of demand for the token. Combined with future plans for burning coins, price is expected to maintain an upward bias, although it has suffered along with the broader market in 2018 and more recently during the summer of 2019.
It was unfortunate in 2020 that a beginning rally was cut short by the coronavirus pandemic, although the token has stabilized as of April 2020, and there are hopes the rally could resume in the summer of 2020.
2.1 HOW ARE KNC TOKENS PRODUCED?The native token of Kyber is called Kyber Network Crystals (KNC). All reserves are required to pay fees in KNC for the right to manage reserves. The KNC collected as fees are either burned and taken out of the total supply or awarded to integrated dapps as an incentive to help them grow.
2.2 HOW DO YOU GET HOLD OF KNC TOKENS?Kyber Swap can be used to buy ETH directly using a credit card, which can then be used to swap for KNC. Besides Kyber itself, exchanges such as Binance, Huobi, and OKex trade KNC.
2.3 WHAT CAN YOU DO WITH KYBER?The most direct and basic function of Kyber is for instantly swapping tokens without registering an account, which anyone can do using an Etheruem wallet such as MetaMask. Users can also create their own reserves and contribute funds to a reserve, but that process is still fairly technical one–something Kyber is working on making easier for users in the future.
2.4 THE GOAL OF KYBER THE FUTUREThe goal of Kyber in the coming years is to solidify its position as a one-stop solution for powering liquidity and token swapping on Ethereum. Kyber plans on a major protocol upgrade called Katalyst, which will create new incentives and growth opportunities for all stakeholders in their ecosystem, especially KNC holders. The upgrade will mean more use cases for KNC including to use KNC to vote on governance decisions through a decentralized organization (DAO) called the KyberDAO.
With our upcoming Katalyst protocol upgrade and new KNC model, Kyber will provide even more benefits for stakeholders. For instance, reserves will no longer need to hold a KNC balance for fees, removing a major friction point, and there will be rebates for top performing reserves. KNC holders can also stake their KNC to participate in governance and receive rewards.
2.5 BUYING & STORING KNCThose interested in buying KNC tokens can do so at a number of exchanges. Perhaps your best bet between the complete list is the likes of Coinbase Pro and Binance. The former is based in the USA whereas the latter is an offshore exchange.
The trading volume is well spread out at these exchanges, which means that the liquidity is not concentrated and dependent on any one exchange. You also have decent liquidity on each of the exchange books. For example, the Binance BTC / KNC books are wide and there is decent turnover. This means easier order execution.
KNC is an ERC20 token and can be stored in any wallet with ERC20 support, such as MyEtherWallet or MetaMask. One interesting alternative is the KyberSwap Android mobile app that was released in August 2019.
It allows for instant swapping of tokens and has support for over 70 different altcoins. It also allows users to set price alerts and limit orders and works as a full-featured Ethereum wallet.
2.6 KYBER KATALYST UPGRADEKyber has announced their intention to become the de facto liquidity layer for the Decentralized Finance space, aiming to have Kyber as the single on-chain endpoint used by the majority of liquidity providers and dApp developers. In order to achieve this goal the Kyber Network team is looking to create an open ecosystem that garners trust from the decentralized finance space. They believe this is the path that will lead the majority of projects, developers, and users to choose Kyber for liquidity needs. With that in mind they have recently announced the launch of a protocol upgrade to Kyber which is being called Katalyst.
The Katalyst upgrade will create a stronger ecosystem by creating strong alignments towards a common goal, while also strengthening the incentives for stakeholders to participate in the ecosystem.
The primary beneficiaries of the Katalyst upgrade will be the three major Kyber stakeholders: 1. Reserve managers who provide network liquidity; 2. dApps that connect takers to Kyber; 3. KNC holders.
These stakeholders can expect to see benefits as highlighted below: Reserve Managers will see two new benefits to providing liquidity for the network. The first of these benefits will be incentives for providing reserves. Once Katalyst is implemented part of the fees collected will go to the reserve managers as an incentive for providing liquidity.
This mechanism is similar to rebates in traditional finance, and is expected to drive the creation of additional reserves and market making, which in turn will lead to greater liquidity and platform reach.
Katalyst will also do away with the need for reserve managers to maintain a KNC balance for use as network fees. Instead fees will be automatically collected and used as incentives or burned as appropriate. This should remove a great deal of friction for reserves to connect with Kyber without affecting the competitive exchange rates that takers in the system enjoy. dApp Integrators will now be able to set their own spread, which will give them full control over their own business model. This means the current fee sharing program that shares 30% of the 0.25% fee with dApp developers will go away and developers will determine their own spread. It’s believed this will increase dApp development within Kyber as developers will now be in control of fees.
KNC Holders, often thought of as the core of the Kyber Network, will be able to take advantage of a new staking mechanism that will allow them to receive a portion of network fees by staking their KNC and participating in the KyberDAO.
2.7 COMING KYBERDAOWith the implementation of the Katalyst protocol the KNC holders will be put right at the heart of Kyber. Holders of KNC tokens will now have a critical role to play in determining the future economic flow of the network, including its incentive systems.
The primary way this will be achieved is through KyberDAO, a way in which on-chain and off-chain governance will align to streamline cooperation between the Kyber team, KNC holders, and market participants.
The Kyber Network team has identified 3 key areas of consideration for the KyberDAO: 1. Broad representation, transparent governance and network stability 2. Strong incentives for KNC holders to maintain their stake and be highly involved in governance 3. Maximizing participation with a wide range of options for voting delegation
Interaction between KNC Holders & Kyber
This means KNC holders have been empowered to determine the network fee and how to allocate the fees to ensure maximum network growth. KNC holders will now have three fee allocation options to vote on: - Voting Rewards: Immediate value creation. Holders who stake and participate in the KyberDAO get their share of the fees designated for rewards. - Burning: Long term value accrual. The decreasing supply of KNC will improve the token appreciation over time and benefit those who did not participate. - Reserve Incentives:Value creation via network growth. By rewarding Kyber reserve managers based on their performance, it helps to drive greater volume, value, and network fees.
2.8 TRANSPARENCY AND STABILITYThe design of the KyberDAO is meant to allow for the greatest network stability, as well as maximum transparency and the ability to quickly recover in emergency situations. Initally the Kyber team will remain as maintainers of the KyberDAO. The system is being developed to be as verifiable as possible, while still maintaining maximum transparency regarding the role of the maintainer in the DAO.
Part of this transparency means that all data and processes are stored on-chain if feasible. Voting regarding network fees and allocations will be done on-chain and will be immutable. In situations where on-chain storage or execution is not feasible there will be a set of off-chain governance processes developed to ensure all decisions are followed through on.
2.9 KNC STAKING AND DELEGATIONStaking will be a new addition and both staking and voting will be done in fixed periods of times called “epochs”. These epochs will be measured in Ethereum block times, and each KyberDAO epoch will last roughly 2 weeks.
This is a relatively rapid epoch and it is beneficial in that it gives more rapid DAO conclusion and decision-making, while also conferring faster reward distribution. On the downside it means there needs to be a new voting campaign every two weeks, which requires more frequent participation from KNC stakeholders, as well as more work from the Kyber team.
Delegation will be part of the protocol, allowing stakers to delegate their voting rights to third-party pools or other entities. The pools receiving the delegation rights will be free to determine their own fee structure and voting decisions. Because the pools will share in rewards, and because their voting decisions will be clearly visible on-chain, it is expected that they will continue to work to the benefit of the network.
3. TRADINGAfter the September 2017 ICO, KNC settled into a trading price that hovered around $1.00 (decreasing in BTC value) until December. The token has followed the trend of most other altcoins — rising in price through December and sharply declining toward the beginning of January 2018.
The KNC price fell throughout all of 2018 with one exception during April. From April 6th to April 28th, the price rose over 200 percent. This run-up coincided with a blog post outlining plans to bring Bitcoin to the Ethereum blockchain. Since then, however, the price has steadily fallen, currently resting on what looks like a $0.15 (~0.000045 BTC) floor.
With the number of partners using the Kyber Network, the price may rise as they begin to fully use the network. The development team has consistently hit the milestones they’ve set out to achieve, so make note of any release announcements on the horizon.
4. COMPETITIONThe 0x project is the biggest competitor to Kyber Network. Both teams are attempting to enter the decentralized exchange market. The primary difference between the two is that Kyber performs the entire exchange process on-chain while 0x keeps the order book and matching off-chain.
As a crypto swap exchange, the platform also competes with ShapeShift and Changelly.
5.KYBER MILESTONES• June 2020: Digifox, an all-in-one finance application by popular crypto trader and Youtuber Nicholas Merten a.k.a DataDash (340K subs), integrated Kyber to enable users to easily swap between cryptocurrencies without having to leave the application. • June 2020: Stake Capital partnered with Kyber to provide convenient KNC staking and delegation services, and also took a KNC position to participate in governance. • June 2020: Outlined the benefits of the Fed Price Reserve (FPR) for professional market makers and advanced developers. • May 2020: Kyber crossed US$1 Billion in total trading volume and 1 Million transactions, performed entirely on-chain on Ethereum. • May 2020: StakeWith.Us partnered Kyber Network as a KyberDAO Pool Master. • May 2020: 2Key, a popular blockchain referral solution using smart links, integrated Kyber’s on-chain liquidity protocol for seamless token swaps • May 2020: Blockchain game League of Kingdoms integrated Kyber to accept Token Payments for Land NFTs. • May 2020: Joined the Zcash Developer Alliance , an invite-only working group to advance Zcash development and interoperability. • May 2020: Joined the Chicago DeFi Alliance to help accelerate on-chain market making for professionals and developers. • March 2020: Set a new record of USD $33.7M in 24H fully on-chain trading volume, and $190M in 30 day on-chain trading volume. • March 2020: Integrated by Rarible, Bullionix, and Unstoppable Domains, with the KyberWidget deployed on IPFS, which allows anyone to swap tokens through Kyber without being blocked. • February 2020: Popular Ethereum blockchain game Axie Infinity integrated Kyber to accept ERC20 payments for NFT game items. • February 2020: Kyber’s protocol was integrated by Gelato Finance, Idle Finance, rTrees, Sablier, and 0x API for their liquidity needs. • January 2020: Kyber Network was found to be the most used protocol in the whole decentralized finance (DeFi) space in 2019, according to a DeFi research report by Binance. • December 2019: Switcheo integrated Kyber’s protocol for enhanced liquidity on their own DEX. • December 2019: DeFi Wallet Eidoo integrated Kyber for seamless in-wallet token swaps. • December 2019: Announced the development of the Katalyst Protocol Upgrade and new KNC token model. • July 2019: Developed the Waterloo Bridge , a Decentralized Practical Cross-chain Bridge between EOS and Ethereum, successfully demonstrating a token swap between Ethereum to EOS. • July 2019: Trust Wallet, the official Binance wallet, integrated Kyber as part of its decentralized token exchange service, allowing even more seamless in-wallet token swaps for thousands of users around the world. • May 2019: HTC, the large consumer electronics company with more than 20 years of innovation, integrated Kyber into its Zion Vault Wallet on EXODUS 1 , the first native web 3.0 blockchain phone, allowing users to easily swap between cryptocurrencies in a decentralized manner without leaving the wallet. • January 2019: Introduced the Automated Price Reserve (APR) , a capital efficient way for token teams and individuals to market make with low slippage. • January 2019: The popular Enjin Wallet, a default blockchain DApp on the Samsung S10 and S20 mobile phones, integrated Kyber to enable in-wallet token swaps. • October 2018: Kyber was a founding member of the WBTC (Wrapped Bitcoin) Initiative and DAO. • October 2018: Developed the KyberWidget for ERC20 token swaps on any website, with CoinGecko being the first major project to use it on their popular site.
With the development of blockchain technology, obtaining data on the chain only is no longer satisfying and how to bridge the real world and the blockchain world has always been the direction of the technological breakthrough. Under this background, Oracle Machine came to our attention. In particular, with the popularity of the DeFi concept, the industry starts to witness a boom of the application of Oracle Machine in financial derivatives, trading platforms, gambling games, and prediction markets.submitted by ThemisOracle to u/ThemisOracle [link] [comments]
At present, Oracle Machine represented by Themis is developing fast with a good momentum, leading the trend of the development of Oracle Machine and continuing to consolidate the basic technical support for the DeFi revolution. Themis’ mining system has been launched in the market, which is refreshing and appealing (see https://themisoracle.com/#/credit for details on the Themis mining).
90% of MIS, the native token of Themis, will be used for mining output. The entire mining mechanism runs through a distributed oracle protocol, which sets up three roles: data provider, data validator, and arbitration node. Reward and punishment mechanisms are applied to ensure the smooth ecological operation.
How does Themis mining work? Is it a new way to become wealthy? What are the characteristics? To answer these questions, we need to analyse the distribution mechanism, mining mechanism, and token value of Themis.
With a fairer mining mechanism, small and medium-sized miners can enjoy better benefits
One of the core values of blockchain is fairness and justice, and allowing everyone in the network to play a role in the system without permission. However, Bitcoin mining is now monopolized by several mining machine vendors such as Bitmain, leaving little space for other miners to participate. If those old PoW public chains, such as Bitcoin, has formed the head effect in mining, what about those new projects? Let's take Cosmos as an example. Since Binance joined its validator node, it has instantly ranked top with the strong financial strength and user base of the top exchange, making the small and medium nodes hard to participate.
After comparison, we can find that the mining mechanism of MIS is very friendly to ordinary users. Assuming that there are 12 mining transactions in a block, the ranking according to the MIS pledged by each transaction would be as follow:
The pledge ranking is based on the jump ranking weighting algorithm rather than the weighted average of the user pledge amount, which can prevent MIS from being controlled by a small number of people, avoid monopoly, creating a win-win situation in the Themis community.
Compared with other mining projects, Themis has introduced a unique pledge ranking method in the mining design. Users in the best ranking area will get the most benefits, which is a good mechanism guarantee for attracting more users to participate in mining. At the same time, it can lead to the decentralization of data providers, ensuring the decentralization of the oracle system and the positive development of the community.
How can miners join in Themis mining? The answer is to become a part of the ecology by playing the role of either data provider, data validator, or arbitration node.
The data provider is mainly responsible for providing various types of data, and the data validator verifies and challenges the data offered by the data provider and provides new data. The arbitration node arbitrates the query raised by the data validator and come up with the final result.
Both the data providers and validators of Themis need to pledge MIS to obtain the qualifications, and the caller of external data also needs to pay MIS assets when accessing the data of Themis oracles. If the data has been verified as correct, data providers and validators will receive mining rewards, and the more they pledge, the more rewards they will receive.
In the mining design of Themis, miners can acquire MIS by providing verifiable random number or offering the price of in-chain assets. Whenever miners call mining contracts, the system will charge no service fee (excluding the service fee of ETH). In addition, if no mining transaction occurs within a certain period of time, the first newly-emerging block containing mining transactions will acquire all the MIS rewards. In this way, miners can be encouraged to continue mining and maintain the ecological stability of Themis.
The number of MIS mining for each mining transaction of miners is calculated as follows:
First, calculate the number of MIS mining rewards N contained in the block of the packaged mining transaction. If the height difference between the block and the previous block containing the mining transaction is y, then N = y * 20.
The MIS mining quantity of this mining transaction is M, then M=Xi/(📷)×N. Among them, X is the ranking of the MIS pledge amount in the block, and those who pledge the same amount of MIS have the same ranking.
Few official pre-mining, while 90% belongs to the community
Based on the official announcement, the distribution of MIS is:
The total amount of MIS is 1 billion, 10% is reserved for early project promotion, the remaining 90% are produced by mining, in which 75% are directly awarded to data providers, 10% to developers, and 5% as reward for arbitration nodes and ecological incentive. The production of mining will be progressively decreased and released with ETH. For some current popular VC-invested projects, institutional holdings hold more than half of blocks and unlock the block every month, which is a huge stress for ordinary pledge users. Many projects also went wrong because institutional investors do not abide by the rules. For MIS, because there is fewer official pre-mining, the selling pressure will be smaller, which is more in line with the value of the blockchain.
The release plan of developer and arbitration node and ecological incentive is as follows:
The release plan of data provider incentive is as follows:
The MIS awarded per block reduces by 10% in every 4 million blocks, and the reward per block at present is 20 MIS.
We can see that the allocation of MIS follows the following principles.
First of all, as MIS is the platform certificate of Themis, it is very reasonable to reserve 10% of MIS for early project promotion.
Secondly, 90% of MIS is produced through sustainable mining. This proportion can motivate contract users and miners to conduct contract mining, truly implementing the spirit of win-win community and token economy.
Finally, among the 90% of MIS, better incentive mechanisms have been adapted, mining reward ratios are subdivided, which can attract more investors to participate in mining.
Reasonable mining mechanism highlights the project value of Themis
Themis, as a public chain that provides a mechanism to solve the problems in Oracle Machine, has a unique charm in the value of MIS.
From the perspective of the number of tokens, the total amount of MIS is 1 billion, and the total mining pool is 900 million. 90% of the tokens are generated by mining, and the mining output gradually decreases its release with the Ethereum block, showing a great potential in its future added value. The earlier you participate in mining, the more profit you can gain.
From the perspective of Themis’s ecological design, Themis is committed to the original intention of building a price oracle. The data provider pays on-chain fees and pledges a certain amount of MIS, and determines the income obtained according to the scale of the pledge; the validator can make profit from challenging the data. Also, any smart contract developer or user need to pay the corresponding fee when calling Themis, and this part of the profit will be distributed to the data provider in proportion. Through this design, a logical closed loop is completed to ensure the healthy operation of the entire ecology and achieve the goal of mutual benefit. In Themis, all parties in the ecology can work together to grow more wealth.
In all, MIS has a huge potential for future development and arbitrage, and of course, a great profit potential as well.
Today, public chains like Themis are not just a technology platform, but also a symbol of future economic operation mode which connect between the blockchain and the real world. Themis, with a fair, justice and open network through mining, is building a strong token ecology, connecting external chain data and the systems, realising data interaction between blockchain and the real world, and more importantly, creating a new mode of token economy.
Hi Parachuters! Here’s part IV of VII as we catch up - your week at Parachute + partners (24 Jan - 30 Jan'20):submitted by abhijoysarkar to ParachuteToken [link] [comments]
In this week’s Parena(s), Cap hosted mini-Parenas (smallest, 2nd smallest, 3rd smallest) this week along with a main Cloodfest which Jeff won to take home 25k $PAR. We also had a special 2nd quick subsequent Parena between Nathan and Foo to determine the 3rd and 4th positions. Alejandro will be hosting a CoD flash game in gun game mode next week in the Parachute War Zone. This week Doc Vic hosted an NBA and Soccer raffle. Bose's History Trivia in TTR was super fun and had 2k $PAR in prizes per question. Gamer Boy’s math trivia had TTR fans reaching for a calculator. Haha. Foo hosted another intense trivia in TTR as well. Afful held another one too for 1k $PAR prize per question with a 10k $PAR prize pot. Cap joined a Y Combinator startup school session to network with other entrepreneurs and gain insights on product growth. Congratulations to Aims1 for winning the #parttrenjraffle (shared in the last update) and becoming the proud owner of two rare collectibles. Gian hosted a rapid round of name-a-tennis-player for $PAR prizes to mark the Australian Open underway. TTR launched a GIF contest this week with a 40k $PAR prize pool. Sweet! Chris announced the restart of the Parachute Super Bowl Squares with a prize pot of 1M $PAR. Whoa! For this week's Two-for-Tuesday we had folks posting songs "featuring bands with amazing guitarists". Great theme GC! For #wholesomewed Jason got Parachuters to talk about pets they wished they had. In the latest #FPL update shared by LordHades, the top 3 spots are still occupied by LH, Alexis and Novel Cloud. Click here for the full update.
Some neat feedback on ParJar from the Y Combinator startup school session
Cap: \"a sneak peak at a one pager we're cooking up\"
The aXpire team was in India this week for a workshop geared towards the release of Bilr. 20k $AXPR burn for the week happened like clockwork. 2gether’s consumer spending report (which was released last week) was covered by Coin Rivet this week. Check out 2gether’s 2019 journey, here. Spanish speakers, you can listen to Founder Salvador Casquero’s thoughts on digital business which he shared with AEFI Fintech Association here. FunOntheRide’s new tutorial video explains how the 2gether card works. This week’s #XIOSocial discussions revolved around high-value-no-profit companies and Citizen’s thoughts on “inverted lending platform”. Read about how to earn to earn crypto and about the SMS industry from Birdchain’s blog. Still waiting to check out the 3 new communities on Uptrennd? Click here to have a peep. If you didn’t know this already, you can now create polls on your posts on Uptrennd. Cool! Click here to read about more updates. Hydro crew sat down for an AMA with the Uptrennd community and gave away 100k $HYDRO tokens for the best questions. Jeff’s interview of Zero Collateral DeFi came out this week. You can read about it here. Congrats to the winners of the Uptrennd Meme Contest. Those were hilarious! For a sneak peek into Uptrennd 2.0’s designs, click here. Steven Aitchison's (CYT Crypto) latest video features the platform. Have a look! The District0x community voted to have industry news in the next DApp Digest stream. For the latest District Weekly, click here. Hydro made it to Crypto Weekly’s list of 250 crypto companies to watch in 2020. The Hydro team wrote about Financial Health Check and Emergency Savings Fund tools to get you prepared for a rainy day. Their article on challenges during digital onboarding processes at banks should be an eye opener for legacy organisations. Epic work Artefe Crypto Art! How will Digital Identity Management play out in the Hydro Pay app? Click here to find out. Silent Notary’s AMA with Quora Inner Circle was last week. Its transcript was released this week. This week they appeared for an AMA with The Block Circle. The Ubikiri app was released this week to the App Stores. Winner of Round 1 of Traders Battle was announced. And just like previous weeks, they posted daily summaries of dev work progress (1, 2, 3, 4, 5, 6, 7, 8, 9).
Uptrennd 2.0 early previews look great!
Sentivate’s $SNTVT token is now supported on the Enjin wallet and does not need to be added as a custom token. Ahead of ETHDenver, where OST’s Pepo app is the official community app, a guide was published. The latest update allows login with a multitude of IDs. CEO Jason Goldberg was interviewed by Jason Nelson (Crypto Insights Journal) where he talked about community building on the blockchain. Check out this blog post by State of the DApps which discusses unique use-cases of Pepo. SelfKey’s $KEY token is now tradable and playable on Play Royal. To celebrate the occasion, competitions were launched with prize pools worth USD 6k in $KEY tokens. The token was also listed on Hotbit and InstaSwap this week. Click here and here for sneak peeks into the SelfKey mobile app under development. Constellation CEO Ben Jorgensen spoke at the Crypto 2020 Summit this week. Community member Constellation LV is currently working on a Ledger app for the project. Click here for a preview. A Russian language section was added to the website. CTO Wyatt Meldman-Floch demonstrated how double spend attacks can be prevented. In Yazom’s January update, founder Sanjé Witter shared that the open beta was on course for release in a couple of months. Pynk’s Rose AI continues to learn and self-improve through advanced algos and inputs from Super Predictors. Read more about it here. Unsure what crowdfunding and seed rounds mean? Pynk will be raising through this mechanism soon. In preparation for it, they released an article to explain what it is and how to pre-register for it. Plus, an article on compounding explains why it is so powerful. A new update for the Wibson app was released this week. The latest version of their protocol paper covers secure data exchange and batch payments. Harmony’s $ONE token swap was covered by Coindesk and BeInCrypto. BitMax launched a BitTreasure event where users earn interest on $ONE deposits. Harmony hosted a dev community meetup in SF in collaboration with Polkadot, Taxa Network and Nervos Network to discuss on Web3. GET Protocol crew appeared for an AMA with Cryptoverse this week. GUTS Tickets got featured on Finnish tech blog Tivi. Crypto Jen (Jenny from the Blockchain) joined Global Crypto Alliance as an advisor this week. $CALL is now supported on Eidoo wallet. The transcript of last week’s COTI AMA with tehMoonwalkeR can be seen here. COTI released incentive plans to reward its TestNet node operators. TxBit exchange announced its support for DoYouTip’s $DYT token swap. ParJar holders will also have their tokens swapped automatically.
And with that, it’s a wrap for this week at Parachute and partners. See you again soon. Cheers!
submitted by tkeycoin to Tkeycoin_Official [link] [comments]
Version 1.3.0 is a powerful update to TkeySpace that our team has been carefully preparing. since version 1.2.0, we have been laying the foundation for implementing new features that are already available in the current version.
Who cares about the security and privacy of their assets is an update for you.
TkeySpace — was designed to give You full control over your digital assets while maintaining an exceptional level of security, which is why there is no personal data in the wallet: phone number, the email address that could be compromised by hackers — no identity checks and other hassles, just securely save the backup phrase consisting of 12 words.
Briefly about the TkeySpace 1.3.0 update :
Code optimization and switching to AndroidXA lot of work has been done on optimizing the code to speed up the application, improving the logic, synchronization speed, calculating the hash of cryptocurrencies, and successfully switching to AndroidX.
New section: Privacy
TORStarting with the current update, the TkeySpace wallet can communicate via the TOR network, includes new privacy algorithms, and supports 59 different currencies.
Tor is a powerful privacy feature for those who own large assets or live in places where the Internet is heavily censored.
Tor technology provides protection against traffic analysis mechanisms that compromise not only Internet privacy, but also the confidentiality of trade secrets, business contacts, and communications in General.When you enable TOR settings, all outgoing traffic from the wallet will be encrypted and routed through an anonymous network of servers, periodically forming a chain through the Tor network, which uses multi-level encryption, effectively hiding any information about the sender: location, IP address, and other data.
This means that if your provider blocks the connection, you can rest easy — after all, by running this function, you will get an encrypted connection to the network without restrictions.
In TOR mode, the wallet may work noticeably slower and in some cases, there may be problems with the network, due to encryption, some blockchain browsers may temporarily not work. However, TOR encryption is very important when Internet providers completely block traffic and switching to this mode, you get complete freedom and no blocks for transactions.
Confidentiality of transactions (the Blockchain transaction)The wallet can change the model of a standard transaction, mixing inputs and outputs, making it difficult to identify certain cryptocurrencies. In the current update, you can select one of several modes for the transaction privacy level: deterministic lexicographic sorting or shuffle mode.
Mode: Lexicographic indexingImplemented deterministic lexicographic sorting using hashes of previous transactions and output indexes for sorting transaction input data, as well as values and scriptPubKeys for sorting transaction output data;
We understand that information must remain confidential not only in the interests of consumers but also in higher orders, financial systems must be kept secret to prevent fraud. One way to address these privacy shortcomings is to randomize the order of inputs and outputs.
Lexicographic ordering is a comparison algorithm used to sort two sets based on their Cartesian order within their common superset. Lexicographic order is also often referred to as alphabetical order or dictionary order. The hashes of previous transactions (in reverse byte order) are sorted in ascending order, lexicographically.In the case of two matching transaction hashes, the corresponding previous output indexes will be compared by their integer value in ascending order. If the previous output indexes match, the input data is considered equal.
Shuffle Mode: mixing (random indexing)To learn more about how “shuffle mode” works, we will first analyze the mechanisms using the example of a classic transaction. Current balance Of your wallet: 100 TKEY, coins are stored at different addresses:
x1. Address-contains 10 TKEY. x2. Address-contains 20 TKEY. x3. Address-contains 30 TKEY. x4. Address-contains 15 TKEY. x5. Address-contains 25 TKEY.
Addresses in the blockchain are identifiers that you use to send cryptocurrency to another person or to receive digital currency.In a classic transaction, if you need to send, for example, 19 TKEY — 100 TKEY will be sent to the network for “melting” coins, 19 TKEY will be sent to the Recipient, and ~80.9 TKEY will return to the newly generated address for “change” in your wallet.
In the blockchain explorer, you will see the transaction amount in the amount of 100 TKEY, where 80.99999679 TKEY is your change, 19 TKEY is the amount you sent and 0.00000321 is the transaction fee. Thus, in the blockchain search engine, most of your balance is shown in the transaction.
How does the shuffle mode work?Let’s look at a similar example: you have 100 TKEY on your balance, and you need to send 19 TKEY.
x1. Address-contains 10 TKEY. x2. Address-contains 20 TKEY. x3. Address-contains 30 TKEY. x4. Address-contains 15 TKEY. x5. Address-contains 25 TKEY.
You send 19 TKEY, the system analyzes all your addresses and balances on them and selects the most suitable ones for the transaction. To send 19 TKEY, the miners will be given coins with x2. Addresses, for a total of 20 TKEY. Of these, 19 TKEY will be sent to the recipient, and 0.99999679 TKEY will be returned to Your new address as change minus the transaction fee.
In the blockchain explorer, you will see the transaction amount in the amount of 20 TKEY, where 0.99999679 TKEY is Your change, 19 TKEY is the amount you sent and 0.00000321 is the transaction fee.
The shuffle mode has a cumulative effect. with each new transaction, delivery Addresses will be created and the selection of debit addresses/s that are most suitable for the transaction will change. Thus, if you store 1,000,000 TKEY in your wallet and want to send 1 TKEY to the recipient, the transaction amount will not display most of your balance but will select 1 or more addresses for the transaction.
Selecting the recovery method for each digital currency (Blockchain restore)Now you can choose the recovery method for each currency: API + Blockchain or blockchain.
Note: This is not a syncing process, but rather the choice of a recovery method for your wallet. Syncing takes place with the blockchain — regardless of the method you choose.https://preview.redd.it/gxsssuxrttx41.png?width=1080&format=png&auto=webp&s=cd9fe383618dda0e990e86485652ff95652a8481
What are the differences between recovery methods?
API + BlockchainIn order not to load the entire history of the blockchain, i.e. block and transaction headers, the API helps you quickly get point information about previous transactions. For example, If your transactions are located in block 67325 and block 71775, the API will indicate to the node the necessary points for restoring Your balance, which will speed up the “recovery” process.
As soon as the information is received, communication with the peers takes place and synchronization begins from the control point, then from this moment, all subsequent block loading is carried out through the blockchain. This method allows you to quickly restore Your existing wallet.
‘’-’’ The API server may fail.
BlockchainThis method loads all block headers (block headers + Merkle) starting from the BIP44 checkpoint and manually validates transactions.
‘’+’’ It always works and is decentralized. ‘’-’’ Loading the entire blockchain may take a long time.
Why do I need to switch the recovery method?If when creating a wallet or restoring it, a notification (!) lights up in red near the selected cryptocurrency, then most likely the API has failed, so go to Settings — Security Center — Privacy — Blockchain Restore — switch to Blockchain. Syncing will be successful.
Selecting the address formatYou can choose the address format not only for Bitcoin but also for Litecoin. Legacy, SegWit, Native SegWit. Go to Settings — Manage Wallets — Address Format.
Working at the code level
Enhanced validation of transactions and blocks in the networkDue to the increased complexity in the Tkeycoin network, we have implemented enhanced validation of the tkeycoin consensus algorithm, and this algorithm is also available for other cryptocurrencies.
What is the advantage of the enhanced validation algorithm for the userFirst, the name itself speaks for itself — it increases the security of the network, and second, by implementing the function — we have accelerated the work of the TkeySpace blockchain node, the application consumes even fewer resources than before.
High complexity is converted to 3 bytes, which ensures fast code processing and the least resource consumption on your device.
SynchronizationThe synchronization process has been upgraded. Node addresses are added to the local storage, and instant synchronization with nodes occurs when you log in again.
Checking for double-spendingTkeySpace eliminates “double-spending” in blockchains, which is very valuable in the Bitcoin and Litecoin networks.
For example, using another application, you may be sent a fake transaction, and the funds will eventually disappear from the network and your wallet because this feature is almost absent in most applications.Using TkeySpace — you are 100% sure that your funds are safe and protected from fraudulent transactions in the form of “fake” transactions.
The bloom filter to check for nodesAll nodes are checked through the bloom filter. This allows you to exclude fraudulent nodes that try to connect to the network as real nodes of a particular blockchain.
In practice, this verification is not available in applications, Tkeycoin — decided to follow a new trend and change the stereotypes, so new features such as node verification using the bloom filter and double-spending verification are a kind of innovation in applications that work with cryptocurrencies.
Updating the Binance and Ethereum librariesUpdated Binance and Ethereum libraries for interaction with the TOR network.
Function — to hide the balanceThis function allows you to hide the entire balance from the main screen.
Advanced currency charts and charts without authenticationDetailed market statistics are available, including volumes, both for 1 day and several years. Select the period of interest: 1 day, 7 days, 1 month, 3 months, 6 months, 1 year, 2 years.
In version 1.3.0, you can access charts without authentication. You can monitor the cryptocurrency exchange rate without even logging in to the app. If you have a pin code for logging in, when you open the app, swipe to the left and you will see a list of currencies.
NewsIn the market data section — in the tkeyspace added a section with current news of the cryptocurrency market.
Blockchain Explorer for TkeycoinTransaction verification for Tkeycoin is now available directly in the app.
Independent Commission entry for BitcoinTaking into account the large volume of the Bitcoin network, we have implemented independent Commission entry — you can specify any Commission amount.
For other currencies, smart Commission calculation is enabled based on data from the network. The network independently regulates the most profitable Commission for the sender.
New digital currenciesThe TkeySpace wallet supports +59 cryptocurrencies and tokens.
CryptocurrenciesTkeycoin (TKEY), Bitcoin (BTC), Litecoin (LTC), Ethereum (ETH), Bitcoin Cash (BCH), DASH, Binance (BNB), EOS.
StablecoinsTrueUSD (TUSD), Tether USD (USDT), USD Coin (USDC), Gemini Dollar (GUSD), STASIS EURO (EURS), Digix Gold Token (DGX), Paxos Standard (PAX), PAX Gold (PAXG), Binance USD (BUSD), EOSDT, Prospectors Gold (PGL).
ERC-20, BEP2, and EOS tokensNewdex (NDX), DigixDAO ERC-20 (DGD), Chainlink ERC-20 (LINK), Decentraland ERC-20 (MANA), EnjinCoin ERC-20 (ENJ), the Native Utility (NUT), 0x Protocol ERC-20 (ZRX), Aelf ERC-20 (ELF), Dawn DAO ERC-20 (AURA), Cashaaa BEP2 (CAS), Bancor ERC-20 (BNT), the Basic Attention Token ERC-20 (BAT), Golem ERC-20 (GNT), Mithril ERC-20 (MITH), MEETONE, NEXO ERC-20, Holo ERC-20 (HOT), Huobi Token ERC-20 (HT), IDEX ERC-20, IDEX Membership ERC-20 (IDXM), Bitcoin BEP2 (BTCB), Waltonchain ERC-20 (WTC), KuCoin Shares ERC-20 (KCS), Kyber Network Crystal ERC-20 (KNC), Loom Network ERC-20 (LOOM), Ripple (XRP), Everipedia (IQ), Loopring ERC-20 (LRC), Maker ERC-20 (MKR), the Status of the ERC-20 (SNT), Ankr Network BEP2 (ANKR), OmiseGO ERC-20 (OMG), ^ american English ERC-20 (^american English), Polymath ERC-20 (POLY), Populous ERC-20 (PPT), Pundi X ERC-20 (NPXS), Parser ERC-20 (REP), Revain ERC-20 (R), Binance ERC20 (BNB-ERC20), Gifto BEP2 (GTO).
Exchange of cryptocurrencyThe “Limitless Crypto Exchange” tab is available for a quick transition to an unlimited exchange in 200 digital currencies — 10,000 currency pairs.
How do I update TkeySpace to version 1.3.0?
Algorithm: SHA-256 Block time: 9m 29s Last block: 655,807 Bl. reward: 7.61 Bl. reward 24h: 7.92 Difficulty: 16,787,780M Difficulty 24h: 16,787,780M Difficulty 3 days: Bytecoin Mining Profitability Calculator. If you're looking to get started in the world of cryptocurrencies or you're already a mining pro, this calculator can help you out. It will estimate the profit you can make mining Bytecoin. It does this based on the currency difficultly level of Bytecoin (BCN) against the Dollar (USD). It also uses the currently difficultly of mining the coin. All you ... Track who's who in the world of Bitcoin with a powerful BTC Block Explorer ; Bitcoin Address Check to see if it has been reported as a scam ; Report a bitcoin scammer like the bitcoin sextortion porn scam email, investment scam, or mining scam; Check a bitcoin wallet balance; Find a bitcoin address owner; Bitcoin Wallet Transaction Alerts notify you by email when a bitcoin address has activity ... Algorithm: MTP Block time: 4m 46s Last block: 317,734 Bl. reward: 6.25 Bl. reward 24h: 6.25 Difficulty: 1,426.609 Difficulty 24h: 1,424.357 Difficulty 3 days: Block Reward. Unlike Bitcoin’s price, the Bitcoin block reward is predictable: every four years (or 210,000 blocks to be exact), the amount of Bitcoins awarded for each block, is cut in half. In 2012, the reward was cut from 50 Bitcoins per block to 25 and is now 12.5 Bitcoins per block. In 2020, this reward will fall to just 6.25 Bitcoins ... Right off the bat – you can’t mine a bitcoin. You can mine a block of bitcoins. Update February 2020 The Bitcoin hashrate jumped almost 3x since same time last year. We were at 43 TH/s and now we are at around 120 TH/s. So we keep breaking records in terms of hashrate and with […] Real time hashing mining. The last blocks mined by different pools. Future predictions about block complexity. Addresses of rich wallets. Transaction Decoding Tools. Historical data on block size and Tx number. The Bitcoin mining calculator allows you to choose a currency, a hash coefficient, power consumption in watts, energy costs, Bitcoin price, initial complexity and complexity increase ... Bitcoin Cash Average block time (minutes) Chart. Transactions Block Size Sent from addresses Difficulty Hashrate Price in USD Mining Profitability Sent in USD Avg. Transaction Fee Median Transaction Fee Block Time Market Capitalization Avg. Transaction Value Median Transaction Value Tweets Active Addresses Top100ToTotal Fee in Reward Binance cryptocurrency exchange - We operate the worlds biggest bitcoin exchange and altcoin crypto exchange in the world by volume “This is a simple countdown timer that calculates the targeted halvening block height minus the current block height multiplied by the Bitcoin 10 minute block time interval (X – Y) * 10 * 60 ...
[index]          
Checkout my new video: https://www.youtube.com/watch?v=BKCCgB99Rto&t=265s #Bitcoin, #CryptoTrading, #Binance, ️Please like, SUBSCRIBE & Share the video ️ ⚡... Binance is blocking US residence soon. Are you wondering which alternative Bitcoin and Crypto exchanges to use? If so tune in! Become a CryptosRus INSIDER to gain exclusive insight on the market ... If you don't know how to calculate cryptocurrency trading profits in 2020, Altrady brings you this cryptocurrency for beginner's video to help you calculate your crypto profits. More info - https ... Find out why Close. Cryptocurrency's market cap calculation vs it's price Cryptocurrency Edutainment ... Therefore I have dedicated this episode of Cryptocurrency edutainment 101 to dedicate some ... Subscribe for daily crypto videos : https://goo.gl/zm1G9x Bitcoin will be the new store of value and crypto will be the new technology evolution and I want to be a part of that trough this channel ... Binance is going to disable all services to all US users starting in September to comply with regulations. They will open up a US division soon. ----- Get Brave ad-free browser: https://brave.com ... Follow Altcoin Daily: https://www.youtube.com/channel/UCbLhGKVY-bJPcawebgtNfbw/videos Protect your crypto with a Ledger - the world’s best hardware wallet: h...